Drywall is a cost-effective material that is used in almost every home. At a relatively low cost, it delivers many benefits, including fire resistance, additional insulation, and more. Although it may be tough, it’s not indestructible. This is why after some time, you are going to need drywall patches. While the repair itself is not rocket science, it still requires a level of expertise that only those with years of experience have. For this reason, before you try to take on a drywall hole repair as a project, here’s what you need to know about what drywall repairs: You Must Have the Right Tools and Materials Minor dents and holes that are no bigger than half an inch can be filled with a thin layer of drywall mud. To do the application correctly, you will need a three or four-inch putty knife that is especially for drywall installation, but it’s not the same as utility knives. You will need this particular type of knife because you will smoothen the filler until it’s flat and the same level as the rest of the wall. Other tools and materials you might need are:
If the hole or crack is bigger than half an inch, you will also need a mesh that you’ll have to reinforce before you do any spackling. You cannot apply drywall mud directly into larger holes because the problem will occur again when the mud dries and crumbles. You Must Be Aware of What’s Behind Your Walls You need to be aware of things hidden behind your wall before you cut into it to do a drywall repair, like plumbing and electrical lines. Don’t assume that the contractors who built or renovated your home followed strict codes – it’s too big a risk to take for a drywall fix. If you are intent on DIY-ing this, make sure that you check what’s in there with a flashlight. If it’s really necessary to make the hole bigger, cut horizontally using a drywall saw but be careful not to go deeper than one inch. You Must Take Your Time When Sanding the Wall You can’t rush the sanding process because if you do, it’s going to show. As soon as the part of the drywall you fixed is dry, sand it with fine-grit sandpaper. Once you are done with the first round, add the second layer of drywall mud and make sure that you go beyond the 1st layer’s edges by at least 2 inches. Wait for that second layer to dry, and then begin re-sanding. You Must Wear Protective Mask and Gloves Did you know that the drywall compound you are going to use has very fine particles that can hurt your lungs if you inhale them? If you plan to repair minor problems with the drywall, make sure to wear a dust mask, especially when you are sanding. Gypsum dust can also dry your hands, so you should grab a pair of disposable gloves and wear them throughout the entire project. Conclusion It’s indeed possible for you to handle minor repairs, but make sure that you are prepared for it because it can be a long process. You need patience and precision if you want your work to be flawless. Also, set your expectations as there’s a high chance that you won’t be able to get results similar to that of an expert. Don’t forget that there are also drywall issues that are too big or too complicated for you to DIY. In such cases, it’s better to call reputable contractors who have been fixing drywalls for a long time. iPaint Painting’s team of professional painters in Edmonton, AB, has years of experience when it comes to drywall repair. No matter how big or small your drywall problem is, our experts can quickly fix it for you. Get in touch with us today to learn more about our services!
2 Comments
When people are ready for a change, they usually get a haircut, have their nails done, or have some image-altering change done to upgrade their appearance. The same is true for commercial buildings. While these are structures that are not physically alive, it is also possible to change the way they look and the image you want them to convey by changing their overall look and appearance. One great way to enhance the overall look of your commercial building is to have it painted. A new paint job can do wonders for your business. It can create a newfound interest in your brand and easily catch the eye of your target audience. Reasons to Have Your Commercial Building Repainted1) To Refresh Your Brand If you want to rebrand, a fresh coat of paint on your commercial building will do the trick. Part of a rebranding strategy is to change colours. This will include your logo, brand identity, and of course, the building that is home to your brand. A new coat of paint on the building will be like a fresh set of clothes that your brand can now proudly wear. 2) To Match the Colors With Current Activities There are certain colours that have special meanings. If your brand is wanting to become recognized for offering a different type of product or service, changing the brand colour, or updating it to incorporate the change is the right way to signal to customers that you have grown as a company. 3) To Improve the Overall Look of the Building Sometimes, having the building painted may be just what the building needed to look new again. They say that to be successful, you have to look the part. The same goes for your building and office space, if your commercial highrise looks drab and dreary, what will it tell your customers? 4) To Protect the Property Having a fresh coat of paint will be a great way to prevent any paint damage from creeping in and destroying the whole look of the building. Having professionals come in periodically to paint the building will ensure that it will be kept looking great for longer. 5) To Get Rid of Paint Damage However, if there is already some level of paint damage, having the building painted will also get rid of it. It will help bring back the fresh and new look to the paint job and to the building as a whole. Conclusion There are many different reasons why you may want to consider having your building repainted. All of them represent a positive change and will benefit your company in the long run. The key to having the paint job done right is to find a skilled building painting contractor to get the job done for you. They will also be able to give you tangible advice about the colour scheme you may want to go with. They are experts in this field and will be glad to offer their insight as to the deeper meaning of colours and how they can help promote what your brand represents. Whether you are looking for a painting team to help you get rid of paint damage, or if you just want a fresher look for your commercial building, you can never go wrong with iPaint Painting. We offer professional interior and exterior painting services for both residential and commercial projects and painting services in Edmonton. We are quality painting contractors who provide interior and exterior house painting services. Contact us and get a quote today! The oldest interior design rule is the 60-30-10 ratio, which divides the colour scheme into colour use percentages—60% primary colour, 30% secondary colour, and 10% accent colour. You will want the right colours that match your interior style. For this reason, you must keep this rule in mind as there are many styles that make it challenging to choose options for your home.
In this article, we will share some of the most common interior design styles and the best colours that complement them: Traditional Style Traditional interior style is inspired by 18th and 19th-century England and France—think reserved, elegant, and ornate. This style mostly involves pieces of furniture made of dark wood, a mix of rich textiles, such as linens, velvet, silk. There’s also a combination of floral and crystal or Victorian-style lighting fixtures. The best colours to match a traditional interior style are neutral or subdued colours. Modern Style Modern interior style is a combination of various styles inspired by Scandinavian and mid-century modern, where it emphasized minimal clutter, sleek surfaces, open spaces, and clean and simple lighting or fixtures. This interior style is best matched with neutral tones. Modern Farmhouse Style This interior style merges the old and new that creates a cozy and inviting space. It comprises wood beams, open-concept layouts, metal elements and fixtures for that perfect contrast, and simple pendant lighting. The style is best paired with neutral tones paired with touches of nature-inspired tones. Scandinavian Style This interior style is so popular because of its simplicity without compromising functionality. Moreover, the Scandinavian interior style paves the way for more sustainable materials and environmentally-friendly home design. On top of that, it produces a cozy and welcoming vibe that involves lots of natural light and light wood furniture or floors. The best colours to use for this type of interior style are all-white with grey undertones. Transitional Style This interior style is a combination of two or more styles to produce a harmonious look. It is often paired with modern lines and traditional elements, such as a chandelier. Neutral colours and off-whites are perfect colours to use for this design. Choosing Your Colours Following the rules of interior design is a good place to start, but it also won’t hurt to let your personality shine. If you want to take a different approach to choose the right colours for your interior design, here are some tips for you to follow:
Choosing the right colours that go with your interior style may not be something you decide on a whim, but it sure is exciting as you go through the process! Conclusion At this point, you now know how to enhance your interior with various styles of paints. If you have decided on the best colours, now you need to choose the right interior house painters who can get the job done well. Do your homework and take the time to find the best painting contractor. Are you looking for the best local painting contractors in Edmonton, AB? At iPaint Painting, we offer interior painting services that will surely satisfy your goals. Get in touch with us today to see how we can help! Exterior house painting is the common DIY job that most homeowners are comfortable doing by themselves. It’s exciting, and it’s only the perfect thing to do on the weekend, especially if you’re trying to save a few bucks or, perhaps, looking for an effective way to keep your mind occupied. After all, painting the outside walls of your home is not that difficult, right? All you need is a brush and paint, and you’re ready to roll.
However, as easy as this job may seem, the reason there are professional painters, especially for exterior walls, is that they are the most susceptible to outdoor elements. Your exteriors are constantly exposed to the sun’s harmful rays, moisture, and mould, which make the paint vulnerable to damage. Because of this, the painting must be done right. If you take on the project without enough experience, you’ll likely commit these five exterior painting mistakes:
Conclusion At this point, you now know the several mistakes that you can make during a DIY exterior wall paint. If you are not 100% confident about your painting abilities, it will do you much good if you leave the project to professionals instead. Although you may spend a little more initially, the mistakes you make will be even costlier, and you wouldn’t want to waste your time as well. If you are looking to hire professional exterior house painters in Edmonton, then you have come to the right place. At iPaint Painting, we have experienced and knowledgeable contractors in exterior wall painting to ensure maximum customer satisfaction upon completion. Get in touch with us today to see how we can help! In any kind of home, even the smallest of details can make a world of difference in the overall look, feel, flow, and function of the whole property.
From furniture layouts and wallpaper choices to full-scale remodels and top-quality fixtures and finishings, even the smallest of details can make a world of difference in how well you get to enjoy your home. Among the different parts of a property, one of the most influential factors is the set of drywall in place. In all sorts of Canadian homes, drywall establishes itself as a pivotal one in the everyday interactions of homeowners and the way the property itself looks. Unless you live in an antiquated, full-wood house that was built in the heyday of gold prospecting, you’ll quickly realize that much of your home’s sidings are constructed through the use of drywall. Common Causes After years of use and enjoyable experiences, you’ll quickly learn to foster a strong appreciation for drywalls. However, a quick look at everything will reveal that your walls aren’t necessarily in the best shape they’ve ever been because of all the years of use and enjoyment that come into play. However, this also brings up a question: why does drywall end up getting damaged, in the first place? Well, here’s an extensive list of different common causes to watch out for: Cause #1: Furniture Scuffs Aside from full-on force damage, scuff marks from your home’s furniture, which are attained with either negligence or age, are another form of drywall damage you may find quickly above all else. With the appearance of a pencil or marker stain, you may mistake these visual indicators or problems with something more serious because of how drastic they can seem. Fortunately, you can avoid having scuffs in your drywall by carefully moving items around in your house and not placing bigger furniture too close to the wall. Cause #2: Popping Nails Another common cause of drywall damage is the presence of popping nails in surrounding areas of the walls, causing a whole lot of problems in both the looks and function departments. Such damages happen in the first place because of unsecured joists or studs that aren’t held together. Cause #3: Water Damage Seen as one of the most common causes of damaged drywall thus far, water damage is easily identifiable by the presence of broken lines in the wall. When it comes to understanding the repercussions of this problem, however, people forget that it can be one of the most problematic, costly, and destructive effects that may see the disintegration of a wall inside-out! Conclusion As the clear foundation of any home’s look, feel, and functionality, drywalls serve a rather vital role in the functional and aesthetic side of things. However, it also pays to know as much as you need to about the potential factors that can damage these walls so that you can prevent such issues from taking over and compromising your interiors’ look and feel! Is your home’s drywall experiencing any of the signs of damage mentioned above? Wait no further because we’ve got you covered with our drywall hole repair and drywall patch services in Edmonton, AB. Get in touch with us today to schedule an appointment and repair at your earliest convenience! |
AuthorWe can accommodate both large and small painting projects. We’ve even got an affordable program for small jobs like hallways, closets, and bathrooms. You’ll love our work. We’re easy to work with too Archives
December 2021
Categories
All
|