Another new spraying equipment

The secret to our incredible finishes is the industry recommend Graco Paint Sprayers. We only use the best equipment to get the best results.

So, let’s spray for the day…

As with any paint job, unless the surface has been properly prepared, you will not get the result you want. So to start off by preparing your surface.

A glazed ceramic surface needs to be roughened a little with fine grade sandpaper – 320 grit. This is to ‘key’ it so that the paint can ‘grip’ to the surface.

Fabric and vinyl needs to be washed and be thoroughly dry before the paint is applied. It is also good to check that the fabric has not had any UV or other protection applied during the manufacturing process that might prevent proper adhesion (this is more likely to have been applied in the case of fabrics or vinyl manufactured for outdoor use).

Glass is best painted if the surface has been etched beforehand, again to provide a ‘key’ to which the paint can adhere.

Metal must be cleaned of any rust, oil, grease or grit deposits before being painted.

Plastic or PVC needs to be cleaned before application. New plastics can be cleaned with a paint thinner while you can use an ammonia-base cleaner on older plastics. In either case, you can also scrub the surface with a good detergent and scouring powder, which is then thoroughly rinsed off in clean water and left to dry. It’s a good idea to ‘key’ the surface by giving it a light, fine sanding with fine grit sandpaper – 320 grit or thereabout. The object is just to roughen the surface ever so slightly so that the paint has something to ‘grip’. Ensure that you give the surface a wipe-down with a clean dry cloth afterwards to remove any sanding debris.

As with any paint job wood must also be clean and sanded smooth. If you are spraying a somewhat patchy previously painted surface. It is best to remove all the old paint (otherwise you can get the old paint showing through and/or giving you an uneven surface). Apply and sand down an undercoat as you would if applying the paint with a brush or roller.

Health & Safety

​Please make sure you use all equipment appropriately and safely when following these tips. You need to be familiar with how to use equipment safely and follow the instructions that came with the equipment. If you are unsure, you may feel it is safest to consult an expert, such as the manufacturer or an expert.